Assembly Instructions
The Eco Peace Meditation Seat is weight tested by Melbourne Testing Service Pty Ltd. "Upon completion of the 200kg proof load test, there was no visible evidence or fracture of the seat or any of the seat's components. Therefore the Eco Peace Seat successfully supported a test load of 200kg, providing a working load capacity of 100kg". Feb. 27th 2020.
The unique feature of the Eco Peace Meditation Seat is the slot and groove assembly.Remove the seat, carry bag and legs from the carton. Remove the legs from the carry bag pockets.
There are three sitting heights in the one Eco Peace Seat
Low Position - (see diagram below). The lower slot inserts into the groove of the seat. The legs can be inserted into either side of the seat. Ensure the legs are inserted all the way into the slot of the seat before using.
Middle Position - (see diagram below). The top slot inserts into the groove of the seat. The legs can be inserted into either side of the seat. Ensure the legs are inserted all the way into the slot of the seat before using.
High Position - (see diagram below) The slot of the long edge of the leg inserts into the groove of the seat. The legs can be inserted into either side of the seat. Ensure the legs are inserted all the way into the slot of the seat.
Measurements from the ground to the top of the seat:
Low Position
The ground to the top of the seat pad at the rear of the seat is 16cm
The ground to the top of the seat pad at the front of the seat is 9.5cm
Middle Position
The ground to the top of the seat pad at the rear of the seat is 22cm
The ground to the top of the seat pad at the front of the seat is 15cm
High Position
The ground to the top of the seat pad at the rear of the seat is 24cm
The ground to the top of the seat pad the front of the seat is 19cm